Category Archives: Packaging Materials and Machinery

Packaging Materials and Machinery

Sanstrap Stretchbands for Fruits and Vegetable Growers

Posted on by

Sanstrap is a clever pallet strap with substantial flexible strength produced from eco friendly PE film. Simple application delivers superb pallet load stability within minimum time. Perfect to secure pallet loads of: cartons, drums, pails and rolls.

The introduction of this elastic stretchband in the past can be regarded as a form of emerging trend inside the product packaging market. By simply placing an elastic stretchband on the upper layer of a pallet, a high system stability is the outcome. Because of its straightforward application (rather than the use of adhesive tape, for instance) and without harming the product packaging – it is especially recommended for intra-company transportation.

Fruits and Vegetables

In the successful marketing of perishable goods like fruits and vegetables, fast transportation and distribution with minimum damage during shipment is very essential.  Crates and boxes are often used for storage and movement of goods.  Prior to the movement of goods, the pallets need to be secured to prevent high stacked pallets from falling or shifting during movement. Different methods can be applied:

  • Stretch wrap or adhesive tape both take time to apply and time to remove. Adhesive tape can damage the boxes and it is an unpleasant product to work with, noisy, sticky and sometimes sharp.  Stretch Wrap is time consuming and to apply it takes far longer and may require dedicated packing stations and equipment.
  • Sanstrap product is a pleasure to use and easy to apply. It is also very easy to remove. And it is a plastic that can be recycled.

Handling and Stowage Practices of Fruits and Vegetables Growers

While the shape and condition of trucks or vans are essential elements in fresh produce transportation, the actual loading and stowing techniques are relevant to damage and loss:

  • the best loading factor should be attained, which is the maximum load that could be transported economically under satisfactory technical conditions;
  • the dimensions and design of packages must provide sufficient degrees of venting of contents with the least wasted room, and the packages needs to be sufficiently strong to safeguard the contents;
  • loading and unloading need to be correctly monitored to avoid reckless handling of packages; loading aids like trolleys, roller conveyors, pallet or forklift trucks has to be employed where possible in order to lessen the handling of individual packages; the use of Sanstrap palletbands can be employed when loading and unloading stacks.
  • stowage has to be cautiously carried out to prevent collapse of the stow for the duration of transport; Sanstrap stretchbands provide easy access to the cargo.
  • packages must not be piled greater than maximum recommended by the producer, otherwise the lower tiers may possibly collapse under the weight.
  • packed produce has to be shielded from the weather all the time including in the course of loading and unloading;
  • If the load will be dispersed to a number of destinations, packages has to be loaded backwards to which they will likely be unloaded, i.e. last on, first off; concurrently, the load has to be distributed equally around the vehicle.

 

When is the Best Time to Buy a Self Adhesive Labelling System?

Posted on by

A number of business owners or flourishing companies are turning up on the retail and wholesale market having a good potential product that will land them a good market share and even create a brand new market. Many are broadening their selection or growing their output capacity.

Each one is confronted with the very same concern; when is it time or when is it warranted to invest funds on a label applicator. Let’s study the 4 probable payback areas for automating your label application in an effort to respond to this inquiry.

1.0    Production Throughput

An in-line pressure sensitive label applicator will typically pick up labelling speeds from under 15 pieces each minute to approximately around eighty goods per minute for many applications as compared to manual or semi-automatic labelling. Labelling may typically be automated at between thirty five and forty five pieces per minute for many round products that call for orientation. This will enable swift turnaround of medium and big orders, eliminating bottle neck in your premises.

2.0    Product Presentation – Consistent, Accurate Label Placement

When presenting your merchandise to the market, eliminating the common mistakes of labelling such as label creasing and also irregular label setting will make a big impact. First impressions count and if you have a new product completely ready for the market you must be conscious about how soon an initial impression is created by people based on the first couple of seconds of simply looking at the presentation. Start up companies can achieve automated labelling results by means of an automatic labelling system through contract manufacturers or hiring systems.

3.0    Automating your production – A Good First Step

Often, the first piece of in-line equipment invested in by a company to manufacture in house is the labeller. Modular systems with the flexibility to deal with numerous range of shapes without any or marginal change parts are the most effective systems. In-Line Labelling machines will normally have a conveyor of length 3.0 meters or less and can feed on to gathering tables or close to the end of a selection and packaging table where by operators remove, check out and package the finished goods.

4.0    Production Cost Savings – Installations can have payback periods of 6 months or less

One area of underestimating expenses for those starting out in business is the time and cost of manually putting on labels. Aside from the “costs” related to the first three considerations in the above list you can find considerable labour expenses to be saved. To be able to manually label a container or product in the western world, the real cost is anywhere between 3 cents to 20 cents per container. Pace in manual labelling can rarely be held; a speed of more than 15 labels per minute eventually ends up to six labels per minute – 1 in every ten seconds. In Asia, where manufacturing cost is lesser, this might work out to be 2 cents or less per label. In higher cost manufacturing bases like Australia, Europe, the USA or South Africa this labelling cost is more likely to rise towards 5 cents per label for every product. Do remember some products have 2 labels or even three labels.

Justifying the acquisition of a labelling system varies; several businesses can benefit in every 4 areas at once while some may benefit on just one of the above criteria. When taking into account a labelling system you should contemplate all four major reasons in the above list and how they might apply to your circumstances.

Whether or not to move to a more in depth machine proposal and eventually proceed through formal machine proposal, machine suppliers providing the Label-On™ modular system of labelling can quickly assist you.